# CONFIGSETTINGS

SETTINGCNAME: INTOSCCLK
DESCRIPTION:
INTOSC oscillator: CLKOUT function on RA6/OSC2/CLKOUT/T1OSO pin, I/O function on RA7/OSC1/CLKIN/T1OSI


SETTINGCNAME: INTOSCIO
DESCRIPTION:
INTOSCIO oscillator: I/O function on RA6/OSC2/CLKOUT/T1OSO pin, I/O function on RA7/OSC1/CLKIN/T1OSI


SETTINGCNAME: ALTERNATE
DESCRIPTION:
ECCP2/P2A is multiplexed with RE7 in Microcontroller mode or with RB3 in Extended Microcontroller mode


SETTINGCNAME: ON
DESCRIPTION:
RA0/RA1 are multiplexed with LEDA/LEDB when Ethernet module is enabled and function as I/O when Ethernet is disabled


SETTINGCNAME: DEFAULT
DESCRIPTION:
ECCP1 outputs (P1B/P1C) are multiplexed with RE6 and RE5; ECCP3 outputs (P3B/P3C) are multiplexed with RE4 and RE3


SETTINGCNAME: ALTERNATE
DESCRIPTION:
ECCP1 outputs (P1B/P1C) are multiplexed with RH7 and RH6; ECCP3 outputs (P3B/P3C) are multiplexed with RH5 and RH4


SETTINGCNAME: OFF
DESCRIPTION:
ECCP2/P2A is multiplexed with RE7 in Microcontroller mode (80-pin and 100-pin devices) or with RB3 in Extended Microcontroller mode (100-pin devices only)


SETTINGCNAME: OFF
DESCRIPTION:
Block 0 (000800-001FFFh) or (001000-001FFFh) is not protected from table reads executed in other blocks


SETTINGCNAME: OFF
DESCRIPTION:
Boot block (000000-0007FFh) or (000000-000FFFh) is not protected from table reads executed in other blocks


SETTINGCNAME: ON
DESCRIPTION:
Boot block (000000-0007FFh) or (000000-000FFFh) is protected from table reads executed in other blocks


SETTINGCNAME: RC7
DESCRIPTION:
SCK/SCL clocks and SDA/SDI data are multiplexed with RC5 and RC4, respectively. SDO output is multiplexed with RC7.


SETTINGCNAME: RD1
DESCRIPTION:
SCK/SCL clocks and SDA/SDI data are multiplexed with RD3 and RD2, respectively. SDO output is multiplexed with RD1.


SETTINGCNAME: OFF
DESCRIPTION:
Boot Block (000000-007FFF, 000FFF or 001FFFh) not protected from table reads executed in other blocks


SETTINGCNAME: ON
DESCRIPTION:
Wait selections for table reads and table writes are determined by the WAIT1:WAIT0 bits (MEMCOM<5:4>)


SETTINGCNAME: OFF
DESCRIPTION:
CCP2 is multiplexed with RB3 in Extended Microcontroller, Microprocessor or Microprocessor with Boot Block mode. Or with RE7 in Microcontroller mode.


SETTINGCNAME: PORTBE
DESCRIPTION:
ECCP2 is multiplexed with RB3 in Extended Microcontroller, Microprocessor or Microprocessor with Boot Block mode. Or with RE7 in Microcontroller mode.


